D-Link DIR-620 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DIR-620
  6. User manual

D-Link DIR-620 User Manual

Wireless n300 router with 3g/cdma/lte support and usb port
Hide thumbs Also See for DIR-620:
Table of Contents

Advertisement

Quick Links

User Manual
DIR-620
Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
January 2015

Advertisement

Table of Contents
loading

Related Manuals for D-Link DIR-620

Summary of Contents for D-Link DIR-620

  • Page 1 User Manual DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port January 2015...

  • Page 2: Table Of Contents

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port User Manual Contents Chapter 1. Introduction..........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications..............7 Product Appearance............12 Front Panel..............12 Side Panel...............14 Back Panel...............15 Delivery Package............16 Chapter 3. Installation and Connection......17 Before You Begin............17...
  • Page 3 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port User Manual Virtual Server Settings Wizard..........77 IPTV Settings Wizard............79 Status..............80 Network Statistics............80 DHCP..............81 Routing Table............82 Clients..............83 Active Sessions............84 Multicast groups............85 Net................86 WAN..............86 Creating PPPoE WAN Connection..........87 Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection....92 Creating Static IP or Dynamic IP WAN Connection......98...
  • Page 4 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port User Manual USB Storage...............190 Information.............190 Filebrowser.............191 Print Server............192 Samba..............193 FTP..............194 DLNA..............195 Transmission..............197 Transmission Settings...........197 Control..............200 URL Filter..............200 Yandex.DNS..............202 Internet Protection Settings..........202 System..............205 Administrator Password..........206 Configuration............207 System Log..............209 Firmware Upgrade............211 Local Update............212 Remote Update............213...

  • Page 5: Chapter 1. Introduction

    Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DIR-620 and configure a PC in order to access its web- based interface.

  • Page 6: Chapter 2. Overview

    Now you can simply update the firmware: the router itself finds approved firmware on D-Link update server and notifies when ready to install it. 1 Not included in the delivery package. D-Link does not guarantee compatibility with all USB modems. For the list of supported USB modems, see the Specifications* section, page 7.

  • Page 7: Specifications

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Specifications Hardware Interfaces · 10/100BASE-TX WAN port · 4 10/100BASE-TX LAN ports · USB 2.0 port LEDs · POWER · · INTERNET · WLAN · 4 LAN LEDs ·...
  • Page 8 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Firewall functions · Network Address Translation (NAT) · Stateful Packet Inspection (SPI) · IP filters · IPv6 filters · MAC filter · URL filter · · Prevention of ARP and DDoS attacks ·...
  • Page 9 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Transmitter output power · 802.11b (typical at room temperature 25 °C) 17dBm (+/-1.5dB) at 1, 2, 5.5, 11Mbps The maximum value of the transmitter · 802.11g (typical at room temperature 25 °C) output power depends upon the radio 14dBm (+/-1.5dB) at 6, 9, 12, 18, 24, 36, 48, 54Mbps...

  • Page 10: Operating Environment

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Operating Environment · Power Output: 12V DC, 1A · Temperature Operating: from 0 to 40 °C · Storage: from -20 to 65 °C Humidity · Operating: from 10% to 90% (non-condensing) ·...
  • Page 11 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual · Huawei E3131 · Huawei E3272 · Huawei E367 · Huawei E392 · Megafon M100-1 · Megafon M100-3 · Megafon M100-4 · Megafon M150-1 · MTS 824F ·...

  • Page 12: Product Appearance

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Product Appearance Front Panel Figure 1. Front panel view. Mode Description The router is powered on. Solid green POWER The router is powered off. No light Attempting to add a wireless device via the WPS Blinking green function.
  • Page 13 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Mode Description The router's WLAN is on. Solid green The WLAN interface is active (upstream or downstream WLAN Blinking green traffic). The router's WLAN is off. No light...

  • Page 14: Side Panel

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Side Panel Figure 2. Side panel view. Name Description A button to enable/disable the router's wireless network and to quickly add wireless devices to the router's WLAN (the WPS function).

  • Page 15: Back Panel

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Overview User Manual Back Panel Figure 3. Back panel view. Port Description LAN 1-4 4 Ethernet ports to connect computers or network devices. A port to connect to a cable or DSL modem or to a private Ethernet...

  • Page 16: Delivery Package

    “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru, DIR-620/A/E1 product page, the downloads tab). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.

  • Page 17: Chapter 3. Installation And Connection

    Operating System Configuration of the multifunction wireless router DIR-620 supporting LTE, 3G GSM and CDMA with a built-in switch (hereinafter referred to as “the router”) is performed via the built-in web- based interface. The web-based interface is available from any operating system that supports a web browser.
  • Page 18 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual USB Modem To connect to an LTE, 3G GSM or CDMA network, you should use a USB modem. Connect it to the USB port of the router, then access the web-based interface of the router, and you will be able to...

  • Page 19: Connecting To Pc

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Make sure that your PC is powered off. 2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
  • Page 20 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 3. In the Local Area Connection Properties window, on the General tab, select the Internet Protocol (TCP/IP) line. Click the Properties button. Figure 5. The Local Area Connection Properties window.
  • Page 21 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 4. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. Figure 6. The Internet Protocol (TCP/IP) Properties window.

  • Page 22: Obtaining Ip Address Automatically In Os Windows 7

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Obtaining IP Address Automatically in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
  • Page 23 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 8. The Network and Sharing Center window.
  • Page 24 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. Figure 9. The Network Connections window.
  • Page 25 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button. Figure 10. The Local Area Connection Properties window.
  • Page 26 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 6. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. Figure 11. The Internet Protocol Version 4 (TCP/IPv4) Properties window.

  • Page 27: Pc With Wi-Fi Adapter

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual PC with Wi-Fi Adapter 1. To connect via an LTE, 3G GSM or CDMA network: connect your USB modem to the USB port located on the left side panel of the router.

  • Page 28: Configuring Wi-Fi Adapter In Os Windows Xp

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Configuring Wi-Fi Adapter in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window.

  • Page 29: Configuring Wi-Fi Adapter In Os Windows 7

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
  • Page 30 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual 6. In the opened Wireless Network Connection window, select the wireless network DIR- 620 and click the Connect button. Figure 15. The list of available networks.

  • Page 31: Connecting To Web-Based Interface

    IP address of the router (by default, the following IP address is specified: 192.168.0.1). Press the Enter key. Figure 16. Connecting to the web-based interface of the DIR-620 device. If the error “ The page cannot be displayed ” (or “ Unable to display the page ”/“ Could not connect to remote server ”) occurs upon connecting to the web-based interface of the router,...
  • Page 32 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual When the web-based interface is accessed the next time and after, the login page opens. Enter the username (admin) in the Login field and the password you specified in the...

  • Page 33: Web-Based Interface Structure

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Web-based Interface Structure General Information Page After successful registration the Home / Information page opens. Figure 19. The general information page. Page 33 of 225...

  • Page 34: Menu Sections

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual The web-based interface of the router is multilingual. If you need to select another language for the web-based interface, place the mouse pointer over the English caption in the top part of the page and select a language from the menu displayed.
  • Page 35 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual To configure the router's wireless network, go to the Wireless network settings wizard page (for the detailed description of the Wizard, see the Wireless Network Settings Wizard section, page 71).

  • Page 36: Notifications And System Drop-Down Menu

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Notifications and System Drop-down Menu The router's web-based interface displays the notifications in the top right part of the page. Figure 21. The web-based interface notifications.
  • Page 37 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Control Description Click the icon to save new settings to the non-volatile memory. Also you can save the device's parameters via the Save button on the System / Configuration page.
  • Page 38 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Installation and Connection User Manual Control Description Click the icon to exit the web-based interface. Logout Page 38 of 225...

  • Page 39: Chapter 4. Configuring Via Web-Based Interface

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual CHAPTER 4. CONFIGURING WEB-BASED INTERFACE Monitoring The page displays an interactive scheme which illustrates the router's settings and the LAN structure. Figure 23. The Monitoring page.
  • Page 40 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual The interactive scheme displays the following elements: Control Description The Internet element displays information on the active connection. Place the mouse pointer over the icon to switch to another connection, remove existing connections, or add new ones.
  • Page 41 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Control Description The Virtual Servers element is designed for redirecting incoming traffic to a specific IP address in the LAN. It displays the total number of rules for redirecting traffic and the number of rules active in this specific LAN.
  • Page 42 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Control Description The Wireless element displays information on Wi-Fi module operation. To the left, the name of the access point is displayed. You can change it in the editing mode.

  • Page 43: Click'n'connect

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Click'n'Connect To configure connection to the Internet, click the Click'n'Connect link in the Home section. Figure 24. Configuring connection to the Internet. Connect the Ethernet cable provided by your ISP to the WAN port of the router. Verify the relevant LED (the INTERNET LED should be on).
  • Page 44 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 25. The page for selecting a 3G network operator. On the opened page, from the Provider drop-down list, select your country and operator if you are...
  • Page 45 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 26. The page for selecting the connection type. On the opened page, select the needed choice of the radio button and click the Next button.

  • Page 46: Creating Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating WAN Connection PPPoE Connection Figure 27. Configuring PPPoE WAN connection. In the Connection name field, specify a name for the connection for easier identification.

  • Page 47: Ipv6 Pppoe Or Pppoe Dual Stack Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual IPv6 PPPoE or PPPoE Dual Stack Connection Figure 28. Configuring IPv6 PPPoE WAN connection. In the Connection name field, specify a name for the connection for easier identification.

  • Page 48: Static Ip Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Static IP Connection Figure 29. Configuring Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.

  • Page 49: Dynamic Ip Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Dynamic IP Connection Figure 30. Configuring Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification.

  • Page 50: Static Ipv6 Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Static IPv6 Connection Figure 31. Configuring Static IPv6 WAN connection. In the Connection name field, specify a name for the connection for easier identification.

  • Page 51: Dynamic Ipv6 Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Dynamic IPv6 Connection Figure 32. Configuring Dynamic IPv6 WAN connection. In the Connection name field, specify a name for the connection for easier identification.

  • Page 52: Pppoe + Static Ip Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPPoE + Static IP Connection Figure 33. Configuring PPPoE + Static IP WAN connection. Fill in the IP Address and Netmask fields. In the Gateway IP address field, enter the IP address of the gateway used by this WAN connection.
  • Page 53 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual If needed, enter the IP addresses of the ISP's local resources. Figure 34. Configuring PPPoE + Static IP WAN connection. Click the Next button to continue.
  • Page 54 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 35. Configuring PPPoE + Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...

  • Page 55: Pppoe + Dynamic Ip Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPPoE + Dynamic IP Connection Figure 36. Configuring PPPoE + Dynamic IP WAN connection. If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
  • Page 56 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 37. Configuring PPPoE + Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...

  • Page 57: Pptp Or L2Tp Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPTP or L2TP Connection Figure 38. Configuring PPTP WAN connection. In the Connection name field, specify a name for the connection for easier identification.

  • Page 58: Pptp + Static Ip Or L2Tp + Static Ip Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 39. Configuring PPTP + Static IP WAN connection. Fill in the IP Address and Netmask fields.
  • Page 59 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual If needed, enter the IP addresses of the ISP's local resources. Figure 40. Configuring PPTP + Static IP WAN connection. Click the Next button to continue.
  • Page 60 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 41. Configuring PPTP + Static IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...

  • Page 61: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 42. Configuring PPTP + Dynamic IP WAN connection. If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
  • Page 62 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 43. Configuring PPTP + Dynamic IP WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...

  • Page 63: 3G Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual 3G Connection Figure 44. Configuring 3G WAN connection. In the Connection name field, specify a name for the connection for easier identification. In the Username field, enter your login, and in the Password and Password confirmation fields –...

  • Page 64: Lte Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual LTE Connection For the USB modem Megafon M100-1, please reboot the router after finishing the Wizard. Figure 45. Configuring LTE WAN connection. In the Connection name field, specify a name for the connection for easier identification.

  • Page 65: Checking Internet Availability

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Checking Internet Availability On the page, you can check the WAN connection you have created. Figure 46. Checking the Internet availability. In the Result section, the status of the WAN connection and possible causes of malfunctions are displayed.

  • Page 66: Configuring Yandex.dns Service

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Configuring Yandex.DNS Service On the page, you can enable the Yandex.DNS service and configure its operating mode. Figure 47. Configuring the Yandex.DNS service. To enable the Yandex.DNS service, select the Enable Yandex.DNS checkbox. Then...

  • Page 67: Configuring Wireless Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Configuring Wireless Connection Figure 48. Selecting the operating mode for the wireless network. If you are not going to use the wireless connection, select the Turn off choice of the Mode radio button.
  • Page 68 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters). Figure 49. Changing the name of the wireless LAN.
  • Page 69 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the next page, you can modify security settings of the WLAN. Select the Protected value from the Network Authentication drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field.

  • Page 70: Configuring Iptv

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Configuring IPTV On the page, you can configure the router to use an IPTV set-top box. Figure 51. Selecting a LAN port to connect an IPTV set-top box.

  • Page 71: Wireless Network Settings Wizard

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Wireless Network Settings Wizard To specify all needed settings for your wireless network, click the Wireless network settings wizard link in the Home section.

  • Page 72: Access Point Mode

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Access Point Mode On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters). Figure 53. Page for changing the name of the wireless LAN.
  • Page 73 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the next page, you can modify security settings of the WLAN. Select the Protected value from the Network Authentication drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field.

  • Page 74: Client Mode

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Client Mode On the opened page, click the Search button. Figure 55. The page for selecting a network to connect. Select the network to which you want to connect and click the Next button.
  • Page 75 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 56. The page for entering the password for connection to the wireless network. If you need a password to connect to the selected network, enter the password in the Network key field and click the Next button.
  • Page 76 Then, if needed, specify another name for the network in the SSID field (use digits and Latin characters). It is strongly recommended to configure the secure wireless network of DIR-620. To do this, select the Protected value from the Network Authentication drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field.

  • Page 77: Virtual Server Settings Wizard

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Virtual Server Settings Wizard To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the LAN, click the Virtual server settings wizard link in the Home section.
  • Page 78 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description A port of the IP address specified in the Private IP field to which traffic is directed from the Public port. Specify the start and the Private port (begin)/ end value for the port range.

  • Page 79: Iptv Settings Wizard

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual IPTV Settings Wizard To configure the router to use an IPTV set-top box, click the IPTV settings wizard link in the Home section. Figure 59. The page for selecting a LAN port to connect an IPTV set-top box.

  • Page 80: Status

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Status The pages of this section display data on the current state of the router: network statistics • IP addresses leased by the DHCP server •...

  • Page 81: Dhcp

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual DHCP The Status / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).

  • Page 82: Routing Table

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Routing Table The Status / Routing table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.

  • Page 83: Clients

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Clients On the Status / Clients page, you can view the list of devices connected to the router and devices accessing its web-based interface.

  • Page 84: Active Sessions

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Active Sessions On the Status / Active sessions page, you can view information on current sessions in the router's network. For each session the following data are displayed: a protocol for network packet transmission, a source IP address and port, a destination IP address and port.

  • Page 85: Multicast Groups

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Multicast groups The Status / Multicast groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.

  • Page 86: Net

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection). On the Net / WAN page, you can create and edit connections used by the router.

  • Page 87: Creating Pppoe Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating PPPoE WAN Connection click the Add button on the Net / WAN page. To create a connection of the PPPoE type, On the opened page, select the PPPoE value from the Connection Type drop-down list and specify the needed values.
  • Page 88 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 68. The page for creating a new PPPoE connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
  • Page 89 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 69. The page for creating a new PPPoE connection. The PPP section. Parameter Description Username A username (login) to access the Internet. Select the checkbox if you don't need to enter a username and Without authorization password to access the Internet.

  • Page 90: Static Ip Address

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled.
  • Page 91 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 70. The page for creating a new PPPoE connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.

  • Page 92: Creating Ipv6 Pppoe Or Pppoe Dual Stack Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating IPv6 PPPoE or PPPoE Dual Stack WAN Connection To create a connection of the IPv6 PPPoE or PPPoE Dual Stack type, click the Add button on the Net / WAN page.
  • Page 93 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 72. The page for creating a new IPv6 PPPoE connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
  • Page 94 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 73. The page for creating a new IPv6 PPPoE connection. The PPP section. Parameter Description Username A username (login) to access the Internet.
  • Page 95 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description For the PPPoE Dual Stack type only. Static IP Address Fill in the field if you want to use a static IP address to access the Internet.
  • Page 96 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 76. The page for creating a new Pv6 PPPoE connection. The IPv6 DNS addresses section. Parameter Description IPv6 DNS addresses Select the checkbox to configure automatic assignment of IPv6 Obtain DNS server DNS server addresses.
  • Page 97 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 77. The page for creating a new Pv6 PPPoE connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.

  • Page 98: Creating Static Ip Or Dynamic Ip Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating Static IP or Dynamic IP WAN Connection To create a connection of the Static IP or Dynamic IP type, click the Add button on the Net / WAN page.
  • Page 99 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 79. The page for creating a new Static IP connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
  • Page 100 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 80. The page for creating a new Static IP connection. The IP section. Parameter Description For Static IP type IP Address Enter an IP address for this WAN connection.
  • Page 101 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 81. The page for creating a new Static IP connection. The Authorization via 802.1x protocol section. Parameter Description Authorization via 802.1x protocol Authorization in the Select the checkbox to allow authorization in the ISP's network via ISP’s network via...
  • Page 102 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 82. The page for creating a new Static IP connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.

  • Page 103: Creating Static Ipv6 Or Dynamic Ipv6 Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating Static IPv6 or Dynamic IPv6 WAN Connection To create a connection of the Static IPv6 or Dynamic IPv6 type, click the Add button on the Net / WAN page.
  • Page 104 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 84. The page for creating a new Static IPv6 connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
  • Page 105 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 85. The page for creating a new Static IPv6 connection. The IP section. Parameter Description For Static IPv6 type IPv6 address Enter an IPv6 address for this WAN connection.
  • Page 106 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 86. The page for creating a new Static IPv6 connection. The Miscellaneous section. Parameter Description Miscellaneous When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.

  • Page 107: Creating Pppoe + Static Ip Or Pppoe + Dynamic Ip Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection To create a connection of the PPPoE + Static IP or PPPoE + Dynamic IP type, click the Add button on the Net / WAN page.
  • Page 108 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 88. The page for creating a new PPPoE + Static IP connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
  • Page 109 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 89. The page for creating a new PPPoE + Static IP connection. The IP section. Parameter Description For PPPoE + Static IP type IP Address Enter an IP address for this WAN connection.
  • Page 110 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 90. The page for creating a new PPPoE + Static IP connection. The Authorization via 802.1x protocol section. Parameter Description Authorization via 802.1x protocol...
  • Page 111 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 91. The page for creating a new PPPoE + Static IP connection. The Miscellaneous section. Parameter Description Miscellaneous (for IP section) When the checkbox is selected, the router uses an alternate routing Isolate connection table for this connection.
  • Page 112 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 92. The page for creating a new PPPoE + Static IP connection. The PPP section. Parameter Description Username A username (login) to access the Internet.
  • Page 113 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description This option is used by some ISPs. Contact your ISP to clarify if this PPP IP extension checkbox needs to be enabled.

  • Page 114: Creating Pptp Or L2Tp Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating PPTP or L2TP WAN Connection To create a connection of the PPTP or L2TP type, click the Add button on the Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-down list and specify the needed values.
  • Page 115 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 95. The page for creating a new PPTP connection. The VPN section. Parameter Description Select the checkbox to enable auto-start of the connection upon the Connect automatically boot-up of the router.
  • Page 116 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encrypt: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit •...
  • Page 117 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select the checkbox if you want one WAN IP address to be used for all computers of your LAN. Select the checkbox to enable protection against ARP and DDoS Firewall attacks.

  • Page 118: Creating Pptp/L2Tp + Static Ip Or Pptp/L2Tp + Dynamic Ip Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN Connection To create a connection of the PPTP + Static IP, L2TP + Static IP, PPTP + Dynamic IP, or L2TP + Dynamic IP type, click the Add button on the Net / WAN page.
  • Page 119 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 97. The page for creating a new PPTP + Static IP connection. The Ethernet section. Parameter Description Ethernet The maximum size of units transmitted by the interface.
  • Page 120 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 98. The page for creating a new PPTP + Static IP connection. The IP section. Parameter Description For PPTP + Static IP and L2TP + Static IP types IP Address Enter an IP address for this WAN connection.
  • Page 121 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 99. The page for creating a new PPTP + Static IP connection. The Authorization via 802.1x protocol section. Parameter Description Authorization via 802.1x protocol...
  • Page 122 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 100. The page for creating a new PPTP + Static IP connection. The VPN section. Parameter Description Select the checkbox to enable auto-start of the connection upon the Connect automatically boot-up of the router.
  • Page 123 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. No encrypt: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit •...
  • Page 124 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Select the checkbox if you want one WAN IP address to be used for all computers of your LAN. Select the checkbox to enable protection against ARP and DDoS Firewall attacks.

  • Page 125: Creating 3G Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating 3G WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to creating a 3G WAN connection, proceed to the 3G/LTE modem / PIN menu and enter the PIN code on the page displayed (see the 3G/LTE Modem section, page 186).

  • Page 126: Usb Modem

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 102. The page for creating a new 3G connection. The USB modem section. Parameter Description USB modem The value of the field specifies the type of the network to which the router connects.
  • Page 127 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description A number dialed to connect to the authorization server of the Dial number operator. Authentication Select a required authentication method from the drop-down list or algorithm leave the AUTO value.

  • Page 128: Creating Lte Wan Connection

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Creating LTE WAN Connection For the USB modem Megafon M100-1, please reboot the router after creating the WAN connection. To create a connection of the LTE type, click the Add button on the Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-down list and specify the needed values.
  • Page 129 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 106. The page for creating a new LTE connection. The USB modem section. Parameter Description USB modem The value of the field specifies the type of the network to which the router connects.
  • Page 130 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 108. The page for creating a new LTE connection. The Miscellaneous section. Parameter Description Miscellaneous Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.

  • Page 131: Lan

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To configure the router's local interface, proceed to the Net / LAN page. Figure 109. Basic settings of the local interface. If needed, edit the basic settings of the local interface.
  • Page 132 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description An operating mode of the router's DHCP server. Enable: the router assigns IP addresses to clients automatically in accordance with the specified parameters. When this value is selected, the DNS Relay, Start IP, End IP, and the Lease time fields are displayed on the page.
  • Page 133 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual In the IPv6 DHCP server section, you can enable the DHCPv6 server of the router and select its operating mode. Figure 111. The section for configuring the DHCPv6 server.
  • Page 134 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IPv4 address in the local area network for a device with a certain MAC address). The router assigns IP addresses in accordance with the specified pairs only when the DHCP server is enabled (in the DHCP server section, in the Mode drop-down list, the Enable value is selected).

  • Page 135: Reservation Wan

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Reservation WAN On the Net / Reservation WAN page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet. When your main connection breaks down, the router activates the backup connection;...
  • Page 136 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description A number of requests that will be sent in order to analyze the status Number of inspections of the main connection when the connection is active (the router of active connection uses the main connection as a default gateway).

  • Page 137: Wi-Fi

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings On the Wi-Fi / Basic settings page, you can enable your wireless local area network (WLAN) and configure its basic parameters.
  • Page 138 (It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN.) A name for the WLAN. By default, the value DIR-620 is specified. SSID It is recommended to specify another name for the network upon initial configuration (use digits and Latin characters).

  • Page 139: Security Settings

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Security Settings On the Wi-Fi / Security settings page, you can modify security settings of the WLAN. Figure 115. The default security settings. By default, the WPA2-PSK network authentication type is specified for the WLAN. WPS PIN from the barcode label is used as the network key.
  • Page 140 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 116. Network authentication types supported by the router. The router supports the following authentication types: Authentication type Description Open authentication (with WEP encryption for wireless network Open modes not supporting 802.11n devices).
  • Page 141 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual The WPA , WPA2 , and WPA/WPA2 mixed authentication types require a RADIUS server. When the Open or Shared value is selected, the WEP Encryption settings section is displayed (the section is unavailable for the wireless network operating modes which support the standard 802.11n):...
  • Page 142 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description The checkbox activating WEP encryption. When the checkbox is selected, the Default Key ID field, the Encryption Key WEP as Enable Encryption WEP HEX check-box, the WEP key length drop-down list, and four Encryption Key WEP fields are displayed on the page.
  • Page 143 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the WPA Encryption settings section is displayed: Figure 118. The WPA-PSK/WPA2-PSK mixed value is selected from the Network Authentication drop- down list.
  • Page 144 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and WPA Encryption settings sections are available: Figure 119. The WPA/WPA2 mixed value is selected from the Network Authentication drop-down list.

  • Page 145: Mac Filter

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual MAC Filter On pages of the Wi-Fi / MAC Filter section, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
  • Page 146 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 121. The page for adding a MAC address. Click the Add button and enter an address in the field displayed. Also you can enter the MAC address of a device connected to the router's LAN at the moment.

  • Page 147: List Of Wi-Fi Clients

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual List of Wi-Fi Clients On the Wi-Fi / List of Wi-Fi clients page, you can view the list of wireless clients connected to the router.

  • Page 148: Wps

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN.
  • Page 149 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To activate the WPS function, select the WPS Enable checkbox and click the Apply button. When the checkbox is selected, the Information and Connection sections are available on the page.

  • Page 150: Using Wps Function Via Web-Based Interface

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To add a wireless device via the PIN method of the WPS function, follow the next steps: 1. Select the WPS Enable checkbox.
  • Page 151 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Later you will be able to add wireless devices to the WLAN by pressing the WPS button of the router. 1. Select the PBC method in the software of the wireless device that you want to connect to the router's WLAN.

  • Page 152: Additional Settings

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Additional Settings On the Wi-Fi / Additional settings page, you can define additional parameters for the WLAN of the router. Changing parameters presented on this page may negatively affect your WLAN! Figure 124.
  • Page 153 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description TX Power The transmit power (in percentage terms) of the router. Select the checkbox to disable multicasting for the router's WLAN. Deselect the checkbox to enable multicasting from WAN...

  • Page 154: Wmm

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
  • Page 155 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual For every Access Category the following fields are available: Parameter Description Arbitrary Inter-Frame Space Number. This parameter influences Aifsn time delays for the relevant Access Category. The lower the value, the higher is the Access Category priority.

  • Page 156: Client

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point. As a rule, the client mode is used to connect to a WISP network. All parameters specified on this page should be provided by your WISP.
  • Page 157 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To configure the router as a client, select the Enable client checkbox. When the checkbox is selected, the following fields are displayed on the page:...
  • Page 158 For the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication types, fill in the Encryption Key PSK field and click the Apply button. After clicking the Apply button, the wireless channel of DIR-620 will switch to the channel of the wireless access point to which you have connected.

  • Page 159: Advanced

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: create groups of ports for VLANs • enable the UPnP IGD protocol •...

  • Page 160: Vlan

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual VLAN On the Advanced / VLAN page, you can create and edit groups of ports for virtual networks (VLANs). By default, 2 groups are created in the router's system: lan: it includes ports 1-4.
  • Page 161 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 128. The page for adding a group of ports for VLAN. You can specify the following parameters: Parameter Description Name A name for the port for easier identification.
  • Page 162 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description A priority tag for the type of traffic transmitted. Tagged port From the list, select an available value to assign it to this group.

  • Page 163: Upnp Igd

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.

  • Page 164: Redirect

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure. Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet.

  • Page 165: Ddns

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
  • Page 166 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To edit parameters of the existing DDNS service, select a needed field in the relevant line of the table, change its value, and click the Apply button.

  • Page 167: Routing

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
  • Page 168 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To edit an existing route, select a needed field in the relevant line of the table, change its value, and click the Apply button.

  • Page 169: Ipv6 Routing

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual IPv6 Routing On the Advanced / IPv6 routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
  • Page 170 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To edit an existing route, select a needed field in the relevant line of the table, change its value, and click the Apply button.

  • Page 171: Remote Access To Device

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Remote Access to Device On the Advanced / Remote access to device page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
  • Page 172 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual After specifying the needed parameters, click the Apply button. To edit a rule for remote access, select a needed field in the relevant line of the table, change its value, and click the Apply button.

  • Page 173: Miscellaneous

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Miscellaneous On the Advanced / Miscellaneous page, you can enable IGMP, SIP, RTSP, and the PPPoE pass through function for the router. IGMP is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resources for some applications, e.g., for streaming video, more...
  • Page 174 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To disable the SIP ALG function, deselect the SIP checkbox and click the Apply button. To enable RTSP, select the RTSP checkbox and click the Apply button. Such a setting allows managing media stream: fast forward streaming audio/video, pause and start it.

  • Page 175: Tr-069 Client

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS). The TR-069 client is used for remote monitoring and management of the device.
  • Page 176 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description Enable TR-069 Client Select the checkbox to enable the TR-069 client. Inform settings Select the checkbox so the router may send reports (data on the Enable device and network statistics) to the ACS.

  • Page 177: Firewall

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering • create virtual servers • define a DMZ •...
  • Page 178 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 138. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter Description General A protocol for network packet transmission. Select a value from the Protocol drop-down list.
  • Page 179 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description IP Addresses The source host/subnet IP address. To choose a device connected to the router's LAN at the moment, select the relevant IP address from the drop-down list (the field will be filled in automatically).

  • Page 180: Virtual Servers

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Virtual Servers On the Firewall / Virtual servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
  • Page 181 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Select a virtual server template from the drop-down list, or select Template Custom to specify all parameters of the new virtual server manually.
  • Page 182 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual In the Remote access configuration section, rules created on the Advanced / Remote access to device page are displayed. If after creating virtual servers you need to edit rules for remote access, you can quickly get to the Advanced / Remote access to device page by clicking the link to the relevant rule.

  • Page 183: Dmz

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the DSL router from the external network to a specified host of the internal network.

  • Page 184: Mac Filter

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers of the router's LAN. Figure 142. The Firewall / MAC filter page.
  • Page 185 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 143. The page for adding a rule for the MAC filter. You can specify the following parameters: Parameter Description The MAC address of a device from the router's LAN. You can enter...

  • Page 186: 3G/Lte Modem

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual 3G/LTE Modem This menu is designed to operate USB modems. If the PIN code check for the SIM card inserted into your USB modem is not disabled, proceed to the 3G/LTE modem / PIN section.

  • Page 187: Information

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Information On the 3G/LTE modem / Information page, you can view data on the USB modem connected to the router. Figure 145. The 3G/LTE modem / Information page.

  • Page 188: Pin

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On pages of the 3G/LTE modem / PIN section, you can change the PIN code of the identification card inserted into your USB modem, disable or enable the check of the PIN code.
  • Page 189 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 147. The 3G/LTE modem / PIN / Changing PIN code page. Enter the current code in the PIN code field, then enter a new code in the New PIN code and New PIN code confirmation fields and click the Apply button.

  • Page 190: Usb Storage

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: view data on the connected USB storage •...

  • Page 191: Filebrowser

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To disconnect one volume of the storage, select the needed value from the USB storage drop- down list and click the Unmount volume button.

  • Page 192: Print Server

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Print Server On the USB storage / Print-server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.

  • Page 193: Samba

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Samba On the USB storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.

  • Page 194: Ftp

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the USB storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.

  • Page 195: Dlna

    60 seconds. In the DLNA server name field, specify a new name of the DLNA server for easier identification in your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
  • Page 196 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual For each folder you can define the type of files which will be available for users of your LAN. To do this, select the needed type of files from the Type drop-down list. To share all files of a folder, select the All value from the Type drop-down list.

  • Page 197: Transmission

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Transmission In this menu you can configure the built-in Transmission torrent client and manage distributing and downloading processes. Transmission Settings On the Transmission / Transmission settings page, you can configure all needed settings for the built-in Transmission client.
  • Page 198 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Parameter Description The port on which the web-based interface of the Transmission Web-interface port client is available. The maximum number of files which clients can download Open files limit simultaneously.
  • Page 199 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Using the web-based interface of the built-in Transmission torrent client you can manage the process of downloading files to the USB storage connected to the router.

  • Page 200: Control

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Control This menu is designed to create restrictions on access to certain web sites. URL Filter On the pages of the Control / URL filter section, you can specify restrictions on access to certain web sites.
  • Page 201 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Figure 157. The Control / URL filter / URL addresses page. Click the Add button and enter an address in the field displayed. Then click the Apply button.

  • Page 202: Yandex.dns

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protect a computer against malicious web sites, and block access to adult web sites.
  • Page 203 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual When the checkbox is selected, the Default mode selection section is displayed on the page. Select the needed choice of the radio button to configure filtering for all devices of the router's...
  • Page 204 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual To create a new filtering rule for a device, click the Add button in the Rules section. In the line displayed, you can specify the following parameters:...

  • Page 205: System

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual System In this menu you can do the following: change the password used to access the router's settings • save the current settings to the non-volatile memory •...

  • Page 206: Administrator Password

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Administrator Password On the System / Administrator password page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET.

  • Page 207: Configuration

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can reboot the device, save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the router's configuration from a previously created file.
  • Page 208 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual The following buttons are available on the page: Control Description Click the button to save settings to the non-volatile memory. Please, save settings every time you change the router's parameters.

  • Page 209: System Log

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual System Log On the System / System log / Configuration page, you can set the system log options and configure sending the system log to a remote host.
  • Page 210 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Control Description A port of the host specified in the Server field. By default, the value Port 514 is specified. After specifying the needed parameters, click the Apply button.

  • Page 211: Firmware Upgrade

    Figure 164. The System / Firmware upgrade page. The current version of the router's firmware is displayed next the D-Link logo in the top left corner of the page. By default, the automatic check for the router's firmware updates is enabled. If a firmware update is available, a notification will be displayed in the top right corner of the page.

  • Page 212: Local Update

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown. To update the firmware of the router locally, follow the next steps: 1.

  • Page 213: Remote Update

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown. To update the firmware of the router remotely, follow the next steps: 1.

  • Page 214: System Time

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual System Time On the System / System time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.

  • Page 215: Ping

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual When the router is powered off or rebooted, the system time is reset to the default value. If you have set automatic synchronization for the system time, the internal clock of the device will be configured after connecting to the Inter net.

  • Page 216: Traceroute

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility. Figure 167. The System / Traceroute page.

  • Page 217: Telnet

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN. By default, access is enabled.

  • Page 218: Usb Users

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual USB Users On the System / USB users page, you can create user accounts to provide access to data on the USB storage connected to the router.
  • Page 219 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Configuring via Web-based Interface User Manual On the opened page, in the Login field, specify a username, and in the Password and Password confirmation fields – the password for the account. You can use letters of the Latin alphabet (uppercase and/or lowercase) and digits.

  • Page 220: Chapter 5. Operation Guidelines

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Instructions Place your router on a flat horizontal surface or mount the router on the wall (the mounting holes are located on the back panel of the device). Make sure that the router is provided with sufficient ventilation.

  • Page 221: Wireless Installation Considerations

    RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DIR-620 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).

  • Page 222: Connecting To Cable Or Dsl Modem

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Operation Guidelines User Manual Connecting to Cable or DSL Modem If you need to connect the router to a cable or DSL modem, do the following. 1. Place the router in an open location in the supposed center of your wireless network. Do not plug the power adapter into the router.

  • Page 223: Chapter 6. Abbreviations And Acronyms

    DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Address Resolution Protocol BSSID Basic Service Set Identifier CDMA Code Division Multiple Access...
  • Page 224 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Abbreviations and Acronyms User Manual Maximum Transmission Unit Network Address Translation Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing Push Button Configuration Personal Identification Number PPPoE Point-to-point protocol over Ethernet...
  • Page 225 DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support and USB Port Abbreviations and Acronyms User Manual Wired Equivalent Privacy Wi-Fi Wireless Fidelity WISP Wireless Internet Service Provider WLAN Wireless Local Area Network Wi-Fi Multimedia Wi-Fi Protected Access Wi-Fi Protected Setup Page 225 of 225...

Table of Contents