Pin - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

PIN

On the USB modem / PIN page, you can change the PIN code of the identification card inserted
into your USB modem, disable or enable the check of the PIN code.
To disable the PIN code check, select the Disable PIN check checkbox, enter the current PIN
code in the PIN code field and click the Enter button.
To enable the PIN code check, deselect the Disable PIN check checkbox, enter the PIN code,
used before disabling the check, in the PIN code field and click the Enter button.
To change the PIN code, enable the PIN code check, enter the current code in the PIN code field,
then enter a new code in New PIN code and New PIN code confirmation fields and click the
Enter button.
If upon one of the operations described above you have entered an incorrect value in the PIN code
field three times (the number of remaining attempts is displayed in the Attempts left field), the
identification card inserted into your USB modem is blocked.
For further use of the card, enter the PUK code in the relevant field, and then specify a new PIN
code for your SIM card in the New PIN code and New PIN code confirmation fields. Click
the Enter button.
Figure 113. The USB modem / PIN page.
Figure 114. Entering the PUK code.
Page 135 of 159
Configuring via Web-based Interface