Mac Filter - D-Link DIR-822 User Manual

Section 4 - Configuration
On the Wi-Fi/MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or
define a set of MAC addresses of devices which will not be allowed to access the WLAN.
To Enable or Disable MAC Filter for a specific SSID, click on the SSID name listed
below each Wi-Fi band.
Toggle this switch to enable MAC filter. When this option is acti-
Enable MAC Filter:
vated, you can create rules for filtering by MAC addresses.
Choose either allow or deny to enable/disable connection only
MAC filter restrict
for specified MAC addresses.
mode:
To add a rule, click on the add button.
Choose which frequency band you want the rule to apply to.
Frequency Band:
Choose which SSID you want the rule to apply to.
SSID:
Specify the MAC address of the device.
MAC Address:
Specify hostname of the device (optional).
Hostname:
Toggle this switch to enable or disable the rule.
Enable Rule:
D-Link DIR-822 User Manual

MAC Filter

87