Lan - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

LAN

To configure the router's local interface, proceed to the Net / LAN page.
If needed, edit the basic parameters of the local interface.
Parameter
IP Address
Netmask
When needed settings are configured, click the Save button.
In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IP
address in the local area network for a device with a certain MAC address). The router assigns IP
addresses in accordance with the specified pairs only when the DHCP server is enabled (in the
DHCP server section, in the Mode drop-down list, the Enable value is selected).
To create a MAC-IP pair, click the Add button and specify the following parameters:
Parameter
IP address
MAC address
Host name
When all needed MAC-IP pairs are specified, click the Save button.
Figure 79. The page for configuring the local interface.
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
An IP address which will be assigned to the device with the
specified MAC address.
The MAC address of the device from the LAN.
A network name of the device for easier identification. Optional.
Page 93 of 159
Configuring via Web-based Interface
Description
Description