Client - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

Client

On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access
point.
As a rule, the client mode is used to connect to a WISP network. All parameters specified on this
page should be provided by your WISP.
To configure the router as a client, select the Enable client checkbox. When the checkbox is
selected, the following fields are displayed on the page:
Parameter
SSID
BSSID
Network Authentication The authentication type of the network to which the router connects.
Figure 93. The page for configuring the client mode.
The name of the network to which the router connects.
The unique identifier of the network to which the router connects.
Page 113 of 159
Configuring via Web-based Interface
Description