Configuration - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

Configuration

On the System / Configuration page, you can save the changed settings to the non-volatile
memory, restore the factory defaults, backup the current configuration, or restore the router's
configuration from a previously created file.
The following buttons are available on the page:
Control
Save
Factory
Backup
Restore
Actions of the Save, Factory, and Backup buttons also can be performed via the top-page menu
displayed when the mouse pointer is over the System caption.
7 The name of the button depends upon the web browser that you use.
Figure 127. The System / Configuration page.
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the router's parameters.
Otherwise the changes will be lost upon hardware reboot of the
router.
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Saving and Restoring Settings section, page 31).
Click the button and follow the dialog box appeared to save the
configuration (all settings of the router) to your PC.
Click the button to upload a previously saved configuration (all
settings of the router) from a file on your PC. Click the
Choose/Browse
configuration file located on your PC.
Page 148 of 159
Configuring via Web-based Interface
Description
7
button to select a previously saved