Additional Settings - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

Additional Settings

On the Wi-Fi / Additional settings page, you can define additional parameters for the WLAN of
the router.
!
Changing parameters presented on this page may negatively affect your WLAN!
The following fields are available on the page:
Parameter
Station Keep Alive
Beacon Period
RTS Threshold
Frag Threshold
DTIM Period
TX Power
Figure 91. Additional settings of the WLAN.
The time interval (in seconds) between keep alive checks of wireless
devices from your WLAN. When the value 0 is specified, the
checking is disabled.
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
The minimum size (in bites) of a packet for which an RTS frame is
transmitted.
The maximum size (in bites) of a non-fragmented packet. Larger
packets are fragmented (divided).
The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data
transmission.
The transmit power (in percentage terms) of the router.
Page 109 of 159
Configuring via Web-based Interface
Description