Wps - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

WPS

On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and
select a method used to easily add wireless devices to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
If the router's WLAN is splitted into parts (the value 2 , 3 , or 4 is selected from the
!
MBSSID drop-down list on the Wi-Fi / Common settings page), the WPS function can
be used only for the first part of the WLAN (the first value from the BSSID drop-down
list).
!
Before using the function you need to configure a type of network authentication based on
WPA/WPA2 with a PSK (on the Wi-Fi / Security settings page).
Figure 90. The page for configuring the WPS function.
Page 105 of 159
Configuring via Web-based Interface