Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers from accessing the network
according to their MAC addresses. You can either manually add a MAC address or select the MAC address from the list of clients
that are currently connected to the DHP-W220AV.
MAC Filtering
Select Turn MAC Filtering Off, Allow MAC addresses listed
Rules:
below, or Deny MAC addresses listed below from the drop-
down menu.
Description:
Enter a name for the rule.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to
"Networking Basics" on page 57 section in this manual.
Click Clear to delete a rule.
Click Save Settings to save the current configuration.
D-Link DHP-W221AV User Manual
Advanced
MAC Address Filter
23