DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
System
In this menu you can do the following:
change the password used to access the router's settings
•
save the current settings to the non-volatile memory
•
create a backup of the router's configuration
•
restore the router's configuration from a previously saved file
•
restore the factory default settings
•
view the system log
•
update the firmware of the router
•
configure automatic synchronization of the system time
•
check availability of a host on the Internet through the web-based interface of the router
•
allow or forbid access to the router via TELNET.
•
Administrator Password
On the System / Administrator password page, you can change the password for the
administrator account used to access the web-based interface of the router and to access the device
settings via TELNET.
!
For security reasons, it is strongly recommended to change the administrator password
upon initial configuration of the router.
Figure 126. The page for modifying the administrator password.
Enter the new password in the Password and Confirmation fields and click the Save button.
Page 147 of 159
Configuring via Web-based Interface