Creating Static Ip Wan Connection - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

Creating Static IP WAN Connection

To create a connection of the Static IP type, click the Add button on the Net / WAN page. On the
opened page, select the Static IP value from the Connection Type drop-down list and specify
the needed values.
Figure 69. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Provider
Port
Name
Enable
Direction
MTU
General settings
Leave the Manually value.
A physical or virtual interface to which the new connection will be
assigned.
Select the USB-WIMAX value to assign this connection to the
WiMAX USB modem.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
Page 78 of 159
Configuring via Web-based Interface
Description