Remote Access - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

Remote Access

On the Advanced / Remote access page, you can configure access to the web-based interface
of the router. By default, the access from external networks to the router is closed. If you need to
allow access to the router from the external network, create relevant rules.
To create a new rule, click the Add button.
Figure 103. The page for adding a rule for remote management.
You can specify the following parameters:
Parameter
IP address
Mask
Protocol
Public port
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete
button.
Figure 102. The Advanced / Remote access page.
A host or a subnet to which the rule is applied. To choose a device
connected to the router's LAN at the moment, select the relevant
value from the drop-down list located to the right of the field (the
field will be filled in automatically).
The mask of the subnet.
The protocol available for remote management of the router.
An external port of the router. You can specify only one port.
Page 125 of 159
Configuring via Web-based Interface
Description