DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Static IP Connection
In the Name field, specify a name for the connection for easier identification and click the Next
button.
If needed, in the MTU field, change
If your ISP uses MAC address binding, in the MAC field,
ISP upon concluding the agreement.
You can click the Clone MAC button to set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment).
Figure 30. Configuring Static IP WAN connection.
Figure 31. Configuring Static IP WAN connection.
the maximum size of units transmitted by the interface.
Page 39 of 159
Configuring via Web-based Interface
enter the MAC address registered by your