Wi-Fi Setup Wizard - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

Wi-Fi Setup Wizard

To specify all needed settings for your wireless network, click the Configure Wi-Fi button.
Figure 52. Common and advanced settings of the wireless LAN.
On the opened page, in the Common settings section, select the Enable Wireless checkbox (if
it was deselected before) to enable Wi-Fi connections.
In the Advanced settings section, you can split your network into several parts. To do this, select
the relevant value (2, 3, or 4) from the MBSSID drop-down list.
Click the Next button to continue.
In the Basic settings section, you can change the basic parameters of your router's WLAN:
"hide" your wireless network (Hide Access Point), specify a name for the network (SSID),
select your location (Country) and the wireless channel number (Channel), specify the operating
mode (Wireless Mode) and the maximum number of devices connected to the wireless network
(Max Associated Clients).
Figure 53. Basic settings of the wireless LAN.
Page 59 of 159
Configuring via Web-based Interface