DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
FTP
On the USB storage / FTP page, you can enable the built-in FTP server of the router to provide
access to the USB storage for users of your LAN.
You can enable the FTP server only when a USB storage is connected to the router (in this case, the
Connected value is displayed in the USB storage field). Select the Enable checkbox; if
needed, change the router's port used by the FTP server in the Port field (by default, the standard
port 21 is specified). Then click the Change button.
To allow access to the content of the USB storage for users of your LAN, proceed to the USB
storage / Users page and create needed accounts.
To disable the built-in FTP server of the router, deselect the Enable checkbox and click the
Change button.
Figure 118. The USB storage / FTP page.
Page 140 of 159
Configuring via Web-based Interface