D-Link DIR-620 User Manual page 99

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
When the Open, Shared, or WEPAUTO value is selected, the WEP Encryption settings
section is displayed (the section is unavailable for the wireless network operating modes which
support the standard 802.11n):
Figure 84. The Open value is selected from the Network Authentication drop-down list.
Parameter
Enable Encryption WEP
Default Key ID
Encryption Key WEP as
HEX
Encryption Key WEP (1-
4)
The checkbox activating WEP encryption. When the checkbox is
selected, the Default Key ID field, the Encryption Key WEP as
HEX checkbox, and four Encryption Key WEP fields are
displayed on the page. For the
authentication types the checkbox is always selected.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for
encryption.
Keys for WEP encryption. The router uses the key selected from the
Default Key ID drop-down list. It is required to specify all the
fields.
You can specify keys containing 5 or 13 symbols (use digits and/or
the Encryption Key WEP as HEX checkbox
Latin characters). If
is selected, you can specify only keys containing 10 symbols (the
digits 0-9 and the characters A-F).
Page 99 of 159
Configuring via Web-based Interface
Description
Shared and WEPAUTO