Wimax; Information - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual

WiMAX

This menu is designed to operate WiMAX USB modems.

Information

On the WiMAX / Information page, you can connect to the network of your WiMAX ISP to
establish a high-speed wireless connection to the Internet.
The following fields and controls are available on the page:
Parameter
SSID
Diode on modem
Link status
MAC address
RSSI
CINR
Base station ID
Transmit power
Frequency
Figure 115. The WiMAX / Information page.
An identifier for the WiMAX network. Specify the parameter if
your WiMAX ISP requires this.
Select the checkbox to enable the modem's LED indicator.
The state of connection to the WiMAX network.
Red light: The connection is not established.
Yellow light: The USB modem is connecting to the network.
Green light: The connection is established.
The MAC address of the WiMAX USB modem.
The signal level at the input of the modem's receiver.
The relation of the signal level to the noise level. This parameter is
used to measure the quality of the signal.
The identifier of the base station.
The signal level at the output of the modem's receiver.
The frequency of the signal transmitted by the modem's receiver.
Page 136 of 159
Configuring via Web-based Interface
Description