Quick Reference Guide - Electronics Line Commpact User Manual

Quick Reference Guide

Function
SET
INSTANT SET
UNSET
PANIC
ALARM
FIRE
ALARM
MEDICAL ALARM
MENU MODE
CHECK TROUBLE
CONDITIONS
SWITCH PGM ON
SWITCH PGM OFF
SERVICE CALL
GLOBAL
CHIME
RECORD
MESSAGE
PLAY
MESSAGE
Telecontrol Commands
Function
2-WAY AUDIO
FULL SET
UNSET
Press...
OR
OR
FULL PART PERIMETER
Hold down this key until
"Instant Setting OK?" is
displayed. Then Press
[USER CODE]
+
+
+
then [USER CODE]
Use this key scroll the
system trouble list
then 30
+
then
then
Press...
Additional Information
One-Key Setting is disabled on the Control
System, enter your user code when setting.
The default master code is 1234.
Instant setting cancels the entry delay after
Part or Perimeter setting. This feature can
. be enabled by your engineer.
Entering your user code also silences the
sounder in the event of an alarm.
Press these buttons together and hold them
down to generate an alarm.
Use the menu navigation buttons ( / )
until the required menu item is displayed
then press √. Alternatively, enter the
shortcut (e.g. 21 for Omit Zones).
Pressing also silences any trouble tones
that may be sounded by the system.
Enter 30 for PGM.
"Dialing" is displayed. The number dialed for
the service call is programmed by your
engineer.
Use the menu navigation buttons ( / ) to
choose enable or disable, then press √.
After recording a message, "Message
Waiting" is displayed until the message is
played back.
The Message Center is an optional feature
that is included with certain versions of
CommPact Control System.
Function
CANCEL SOUNDER
EXTEND CALL
DISCONNECT
ii
Press...
then