Installing Plug-In Cards; Figure 2-3:Installing Plug-In Cards - Advantech IPC-602 User Manual

2u 6-slot industrial rackmount chassis

Hide thumbs Also See for IPC-602:

Table of Contents

2.4 Installing Plug-in Cards

After removing the cover, you can easily install plug-in cards by follow-

ing the steps. Please refer to Figure 2-3 below:

1. Unscrew the screws on the card cage.

2. Insert the CPU card carefully into the PICMG slot and then fix it by

screwing it into the card bracket. You can also fix the other edge of

the CPU card using the supplied small L-form holder.

3. If users need to insert other cards on the other side of the backplane,

please loosen the L-form support first. After installing the cards, also

fix them to the card cage by screwing them into the card bracket. Then

replace the L-form support and fasten it.

4. After all cards are installed completely, put card cage back into the

correct location in the chassis. Finally, fasten the screws.

IPC-602 User's Manual

Figure 2-3: Installing plug-in cards

Table of Contents