Advantech IPC-6806S User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Chassis
  5. IPC-6806S
  6. User manual

Advantech IPC-6806S User Manual

Wallmount ipc chassis for 6 half-sized cards
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IPC-6806S
Wallmount IPC Chassis for 6
Half-sized Cards
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPC-6806S and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech IPC-6806S

Summary of Contents for Advantech IPC-6806S

  • Page 1 IPC-6806S Wallmount IPC Chassis for 6 Half-sized Cards User Manual...
  • Page 2 Copyright Notice The documentation included with this product is copyrighted 2005 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.
  • Page 3 Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or...

  • Page 4: Declaration Of Conformity

    This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
  • Page 5 Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately. • IPC-6806S chassis • A pair of wallmount brackets • User manual •...
  • Page 6 The sound pressure level at the operator's position according to IEC 704- 1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. Wichtige Sicherheishinweise Bitte lesen sie Sich diese Hinweise sorgfältig durch.
  • Page 7 Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen könnte Verletzungen hervorrufen. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.
  • Page 8 Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder weiger. Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend der IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab. Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage.

  • Page 9: Table Of Contents

    2.4 Installing add-in cards ........... 13 2.5 Installing wallmount brackets ....... 15 Chapter 3 Operation ............18 3.1 The Front Section of IPC-6806S......18 3.1.1 Switches ............... 18 3.1.2 LED indicators ............. 18 3.2 Replacing the fan and fan filter ......19 3.2.1 Replace the fan filter ...........
  • Page 10 B.2.2 Connectors ............28 B.2.3 Connector Pin Definition ........28 IPC-6806S User Manual...
  • Page 11 General Information...

  • Page 12: Chapter 1 General Information

    1.1 Introduction Specially designed for the factory floor and other harsh industrial envi- ronments, the IPC-6806S IPC chassis is ideal for system integrators or users who require a compact and rugged system. The chassis comes with a 1U-high 150 W ATX power supply and can accept one 3.5" FDD, one internal 3.5"...

  • Page 13: Power Supply

    • Safety: CE/UL/TUV/CB/CCC 1.5 Passive Backplanes Options IPC-6806S can accept a 6-slot half-sized passive backplane to support up to six full-sized cards. The PCA-6106-B can support up to six ISA cards, while the PCA-6105P5-0B1 can support up to five PCI cards, including one PCI-bus CPU card.

  • Page 14: Dimensions Of Ipc-6806S

    1.6 Dimensions of IPC-6806S Figure 1.1: Dimensions of IPC-6806S IPC-6806S User Manual...
  • Page 15 Figure 1.2: Details of wallmount brackets Chapter 1...
  • Page 16 IPC-6806S User Manual...
  • Page 17 System Setup...

  • Page 18: Chapter 2 System Setup

    Chapter 2 System Setup The following procedures are provided to assist you in installing a back- plane, CPU board, drives, and add-in cards into IPC-6806S chassis. Please also refer to the Appendix A, Exploded Diagram, for the name of each part referred to in this manual.

  • Page 19: Opening The Cover

    2.1 Opening the cover To open the cover of the IPC-6806S, proceed as follows. Remove two screws (one on each side) which secure the cover to the card cage (see Figure 2-1). Lift the lid to expose the interior of the chassis.

  • Page 20: Installing Passive Backplane & Cpu Card

    2.2 Installing passive backplane & CPU card IPC-6806S accepts a 6-slot passive backplane to support up to six half- sized cards. To install a backplane and a CPU card, refer to Figure 2-2 and proceed as follows: CPU CARD EMI SPRING PLATE BACKPLANE Figure 2.2: Installing a backplane &...
  • Page 21 Referring to Figure 2-2, carefully place the passive backplane and EMI spring plate in the IPC-6806S chassis and fix it with screws. For the bare IPC-6806S chassis, the EMI spring plate is stored in the accessory box. Before installing the CPU card, check all devices, such as CPU, CPU cooler, and RAM modules, then make sure they have been installed on the CPU card correctly.

  • Page 22: Installing Disk Drives

    HDD mounting brackets and fix the HDD with screws. Place the HDD together with HDD mounting brackets to the inside of the top cover of IPC-6806S, and fix it with the four screws removed in Step 1.

  • Page 23: Floppy Disk Drive

    Plug a floppy drive power connector into the FDD. 2.4 Installing add-in cards IPC-6806S can accept up to six half-sized cards (including a CPU card) via the supported passive backplane. To install an add-in card, refer to Figure 2-4 and proceed as follows: Figure 2.4: Installing an add-in card...
  • Page 24 Insert a plug-in card. Make sure that the card bracket has been inserted properly. Fasten the card at the top of the bracket with a screw. Repeat Step 2 if there is more than one card. IPC-6806S User Manual...

  • Page 25: Installing Wallmount Brackets

    2.5 Installing wallmount brackets IPC-6806S provides a pair of wallmount brackets in the accessory pack. To wall-mount your chassis, refer to Figure 2-5 and proceeds follows. Figure 2.5: Install wallmount brackets Attach the wallmount brackets to the bottom of the chassis and fix them with the six provided screws.
  • Page 26 IPC-6806S User Manual...
  • Page 27 Operation...

  • Page 28: Chapter 3 Operation

    Chapter 3 Operation 3.1 The Front Section of IPC-6806S 3.1.1 Switches Two switches are used for system power on-off and system reset. • System Reset Switch: Press this switch to reinitialize the system. • Power On-Off Switch: Use this switch to turn on/off the system power.

  • Page 29: Replacing The Fan And Fan Filter

    3.2 Replacing the fan and fan filter To replace the system fan or fan filter at the front end of the chassis, refer to Figure 3-1 and proceed as follows: Figure 3.1: Changing the fan and filter 3.2.1 Replace the fan filter Remove the two screws located at the bottom of the filter cover.

  • Page 30: Replacing The Power Supply

    Plug the ATX power connector into the passive backplane, +12V power connector into the CPU card, and the peripheral power con- nector(s) into the proper disk drive(s). Return the cover of the IPC-6806S and plug in the power cord. IPC-6806S User Manual...
  • Page 31 Exploded Diagram...

  • Page 32: Appendix A Exploded Diagram

    Appendix A Exploded Diagram Figure A.1: Exploded Diagram IPC-6806S User Manual...
  • Page 33 Passive Backplanes...

  • Page 34: Appendix B Passive Backplanes

    Appendix B Passive Backplanes B.1 PCA-6106-B: 6-slot ISA backplane B.1.1 Dimension Drawing Size: 140.2 x 175 mm IPC-6806S User Manual...

  • Page 35: Connectors

    B.1.2 Connectors Connector Description ISA1 ~ 6 16-bit ISA bus connector KB-In, from CPU card K/B connector KB2 ~ 3 KB-Out, 5-pin external K/B connector AT power connector ATX1 ATX power connector PS-ON function, 3-pin connector to CPU card for ATX sig- 8-pin alarm board power connector 3-pin +5V and +12V power connector B.1.3 Connector Pin Definition...
  • Page 36 ATX1 Connector Signal Signal Signal Signal +3.3V +3.3V +3.3V -12V +5VSB 14 PS-ON 19 +12V CN1 Connector Signal PS-ON +5VSB CN2 Connector Signal Signal Signal Signal +5VSB 3 -12V +3.3V +12V CN3 Connector Signal +12V IPC-6806S User Manual...

  • Page 37: Pca-6105P5-0B1: 5-Slot Pci Backplane

    B.2 PCA-6105P5-0B1: 5-slot PCI backplane B.2.1 Dimension Drawing Size: 143 x 176 mm Appendix B...
  • Page 38 8-pin alarm board power connector 3-pin +5V and +12V power connector 3-pin +12V fan connector B.2.3 Connector Pin Definition KB1 ~ 3 Connector Signal KBCLK KBDATA KBGND KBVCC AT1 Connector Signal Signal Signal Signal -12V +12V IPC-6806S User Manual...
  • Page 39 ATX1 Connector Signal Signal Signal Signal +3.3V +3.3V +3.3V -12V +5VSB 14 PS-ON 19 +12V CN1 Connector Signal PS-ON +5VSB CN2 Connector Signal Signal Signal Signal +5VSB 3 -12V +3.3V +12V CN3 Connector Signal +12V CN3 Connector Signal +12V Appendix B...
  • Page 40 BIG1 Connector Signal +12V IPC-6806S User Manual...

Table of Contents