Printer Function (Calibrate, Ethernet Setup, Rtc Setup; Install Memory Card - AMT Datasouth Fastmark M5 Plus Series User Manual

3.9.2 Printer Function (Calibrate, Ethernet setup, RTC setup...)

1. Select the PC interface connected with bar code printer.
2. Click the "Function" button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide in the CD disk \ Utilities directory.

3.10. Install Memory Card

1. Turn the printer over.
2. Remove 1 screw and open the memory card cover.
Function
Factory Default
Dump Text
Configuration Page
RTC Setup
Calibrate Sensor
Reset Printer
Print Test Page
Ignore AUTO.BAS
Ethernet Setup
21
Description
Initialize the printer and restore the settings to
factory default.
To activate the printer dump mode.
Print printer configuration.
Synchronize printer Real Time Clock with PC.
Calibrate the sensor specified in the Printer Setup
group media sensor field.
Reboot the printer.
Print a test page.
Ignore the downloaded AUTO.BAS program.
Setup the IP address, subnet mask, gateway for
the on board Ethernet.
Memory Card Cover