Printer Function (Calibrate, Ethernet, Rtc Setup - AMT Datasouth Fastmark M5 Plus Series User Manual

3.8.2 Printer Function
1. Select the PC interface connected with bar code printer.
2. Click the "Function" button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility
quick start guide in the CD disk \ Utilities directory.
Document #120522 Rev-A
(Calibrate, Ethernet, RTC setup...)
Function
Initialize the printer and restore the settings
Factory Default
to factory default.
Dump Text To activate the printer dump mode.
Configuration Page Print printer configuration.
Synchronize printer Real Time Clock with
RTC Setup
PC.
Calibrate the sensor specified in the Printer
Calibrate Sensor
Setup group media sensor field.
Reset Printer Reboot the printer.
Print Test Page Print a test page.
Ignore the downloaded AUTO.BAS
Ignore AUTO.BAS
program.
Setup the IP address, subnet mask,
Ethernet Setup
gateway for the on board Ethernet.
22
Description