Static Ethernet Ip Address Setting - AMT Datasouth Accel-7450 User Manual

Static Ethernet IP Address Setting

The following steps are required when setting a static IP Ethernet address
through the printer control panel menu setup.
1. Press the MENU key while depressing the ALT key.
HIGH IMPACT
+
MENU
2. Scroll to item 43 with UP arrow key.
3. Open item 43 with the right arrow key.
4. Press the up arrow key to increase (down to decrease) the underlined
digit.
5. Press the right arrow key to select next digit. Repeat steps 4 and 5
6. Press the ENTER key after complete address is entered.
7. Press the MENU key. The setting is automatically saved and the printer is
initialized.
ENTER
ALT
until designated IP address is entered.
- 31 -
MENU SETUP
1. TOF ADJ MANL
2. TOF ADJ TRAC
43. IP ADDRESS
44. SUBNET MASK
IP ADDRESS
010.000.000.001
IP ADDRESS
110.000.000.001
MENU SETUP
1. TOF ADJ MANL
2. TOF ADJ TRAC
ACCEL-7450