Loading Media In Cutter Mode - AMT Datasouth Fastmark M5 Plus Series User Manual

3.7 Loading Media in Cutter Mode

1. Open the printer top cover.
2. Insert the spindle into the media roll.
3. Install a media roll onto the roll mount.
4. Thread the media, printing side face up, through the guides, platen and cutter module
outlet.
Media Guide
Cutter Media Opening
5. Adjust the black center-biased guides to fit edge of the media/backing.
6. Close the top cover
.
Fig. 18 Media installation in cutter mode
Fig. 19 Media installation in cutter mode completed
15
Adjustment Knob
Platen
Cutter