Displays - Cooper Security i-on160EX Administrator's And User Manual

1. Introduction
b) Press this key to abandon your decision when the
display shows "Are you sure Y/N?"
Press this key to gain access to the Menu.
1 to 0, Used to key in access codes. Can also be used to key in
*, # text for names, and telephone numbers.
# Used when keying in text: press to change between
capitals or small letters.
Press both these keys at the same time to start a Panic
Alarm. (The Installer must enable this feature.)

Displays

The LCD display shows messages and prompts to help guide you
through setting, unsetting, resetting and programming the
system.
When the system is idle (either while
set or unset) the display shows the
"standby screen", comprising the time
and date:
(The top line of the display may show
the installer's name instead of "i-
on160".)
To draw your attention to special events
the rim of the navigation key glows red.
In a part setting system, the four LEDs
on the right of the programming keys
show you whether the system is set or
unset: The left hand LED glows when the
system is full set, the other LEDs glow
when the system is in one of the part set
states.
In a partitioned system these LEDs are
not used.
Page 6
i-on160EX
11:15 20/6/09
Speedy Alarms Inc
11:15 206/09
A
B
C
D
A 1 2 abc
B 4 ghi 5 jkl
C 7 pqrs 8 tuv
D * 0
i-on160
1 2 abc 3 def
4 ghi 5 jkl 6 mno
7 pqrs 8 tuv 9 wxyz
* 0 #
3 def
6 mno
9 wxyz
#