Compliance Statement - Cooper Security i-on160EX Administrator's And User Manual

i-on160

Compliance Statement

The i-on160EX is suitable for use in systems designed to comply
with PD6662:2004 at Grade 2, Grade 3 and environmental class
II.
The i-on160EX is suitable for use in systems designed to comply
with the requirements of EN50131-3 at Grade 2, Grade3 and
environmental class II.
This product complies with the requirements of EN50131-6:2008
at Grade 2, Grade 3 and environmental class II.
When fitted with the appropriate communicator (see i-on160EX
Installation Guide) this equipment is compliant with EN 50136-1.
It allows the alarm transmission system to meet the performance
requirements of EN 50131-1:2006 ATS 2 provided that:
a) It is installed in accordance with the installation instructions.
b) The connected PSTN is functioning normally.
If the installer selects a non-compliant configuration then
they must remove or adjust compliance labelling
Page v