Cooper Security i-on160EX Administrator's And User Manual page 43

i-on160
programmed into the control
unit. In the example shown the
name is "User 001".
8. Press u or n to display the
user you wish to edit.
(Alternatively, if you already
know their user number, you
can key that in and the display
will show that user
immediately.)
9. Press Y .
The bottom line shows:
10. Press n .
11. Press Y.
The bottom line of the display shows
the current user type. See page 7
for a description of the user types
available. A "*" at the beginning of
the line is there to remind you of the
current type if you scroll away.
12. Press u or n to scroll through
the list of user types available.
13. Press Y to assign the user type to
the user.
Partitions
(If your system is a part setting system then you will not see this
option) Use this option to assign users to one or more partitions.
Note: You cannot change User 001's partitions. User 001 always
belongs to all partitions.
1. Make sure the display shows
the standby screen.
2. Press .
4. Administration
EDIT USER
User 003
USER 003
Name
USER 003
Type
USER 003
*Normal User
USER 003
Guard User
USER 003
Type
i-on160EX
12:20 02/11/2010
Enter Access Code
(
>
>
>
>
)
Page 37