Cooper Security i-on160EX Administrator's And User Manual page 31

i-on160
access.
Partitions you have chosen to
unset, unset immediately.
Partitions you have chosen to
set start their exit timer (or
set immediately - see note.).
Note: If a partition is programmed
to set instantly make sure
you are outside the
protected area before
pressing
The keypad sounds the exit
tone (a continuous tone). The
top line of the display shows
the part of the system being
set, the bottom line shows
the remaining exit time (in
seconds).
9. Leave by the designated exit
door (if necessary).
At the end of the exit time
the selected Partition(s) set.
Notes:
a) If you want to stop setting
then press Unset.
b) If a Partition is Full Set then
you cannot go directly to
Part Set. You must unset
the Partition first. If the
Partition is Part Set then
you cannot go directly to
Full Set. You must unset the
Partition first.
.
Y
3. Setting and Unsetting
Setting
10 to set
i-on160EX
12:20 11/09/2010
Page 25