5.8
NAT
The NAT menu in the Advanced menu bar allows setting up the Static NAT Mapping
and Port Range Mapping.
5.8.1
Static NAT Mapping
Static NAT Mapping allows a pool of local IP addresses to share a public IP address.
It is a form of NAT that maps multiple Private IP addresses to a single Public IP
address. It allows several virtually addressed workstations to share a single global
address. PAT uses the TCP and UDP port numbers to map multiple virtual addresses
to a single global address.
Follow the steps below to configure the Static NAT Mapping:
STEP 1: Click the Static Nat Mapping tab on the NAT menu.
STEP 2: Click Add to add a new entry of the static Nat mapping. Fill out the
following fields and click Apply.
STEP 3: The new entry will be listed in previous Static NAT Mapping list.
58