Table of Contents
Advertisement
5.2
VLAN
To configure the VLAN function, click VLAN from the Advanced menu bar. The
following parameters are displayed:
Parameters:
VLAN:
Select enable or disable to activate/deactivate the VLAN function.
Forward DB Type
: Used to configure the forwarding database learning type.
There are two types of learning for the FDB: Multi and Single.
Multiple:
the learned entries will be distributed to five databases, (VLAN 1~4 and
non-VLAN)
Single:
the learned entries will be collected into a single database.
IGMP Snooping:
Select enable or disable to activate/deactivate IGMP
snooping.
VLAN:
Check the VLAN interface to enable it or uncheck it to disable it.
Ethernet Port:
Select the LAN interfaces you wish to attach to each VLAN. Note
that each LAN interface can only be attached to one VLAN.
PVC:
Select the VCI/VPI value for the VLAN, you can only select from values that
have been configured as Bridge mode on the WAN interface (refer to section 4.4,
WAN Setup).
Action:
Click the Set button to apply the settings, or click the Clear button to
delete a VLAN group.
41
Advertisement
Table of Contents
