Wlan Basic Parameters - Comtrend Corporation CT-535 User Manual

Wireless adsl router

Hide thumbs Also See for CT-535:

Table of Contents

4.6.1 WLAN Basic Parameters

To access the WLAN Basic parameters click on the WLAN Basic tab on the WLAN

Settings screen. The WLAN Basic Parameters menu includes the parameters listed

below. After changing any parameters, click on the Apply button to update the

parameters, or click on the Restore button to retain the original settings.

IP Address

Subnet Mask

SSID

Channel

Enter the IP address for the WLAN interface

Enter a subnet mask for the WLAN interface

The SSID should match with your client adapters. The SSID

(Service Set ID) allows you to uniquely identify your Access

Point in the radio environment.

The channel should match with client adapters. The Direct

Sequence Spread Spectrum (DSSS) channel number is an

identifier for the frequency on which your WLAN

connectivity is enabled in the WLAN network. Although the

configurable DSSS channel number range is from 1 up to

14, restrictions apply depending on the country where the

Wireless ADSL Router is used- FCC: channels 1 to 11;

ETSI: channels 1 to 13.

Table of Contents