Table of Contents
Advertisement
4.6.4 Mac Filter
This screen allows wireless access to be restricted or enabled based on a MAC
address. Enter the following parameters.
MAC filter status: Disable - de-activates MAC filtering, allow – permits access
for the specified MAC address, deny –reject access of the specified MAC address.
Click the SET button to submit the setting. (the status will impact all MAC
Addresses that have been entered as filters)
MAC address: Enter the MAC address of the access point, and then click the Add
button.
To delete an entry select the entry at the bottom of the screen and then click the
Delete button, located in the middle of the screen.
33
Advertisement
Table of Contents
