Table of Contents
Advertisement
4.7.1 Enable RIP
To enable RIP, complete the following steps:
STEP 1: Click Routing Setup from the menu bar.
STEP 2: Select On in the Rip Status field.
STEP 3: Select a RIP Version (Version 1 or Version 2) from the Version field.
STEP 4: Click Apply to submit the settings.
STEP 5: After submitting the new Rip settings, the List of Static Routes will be
updated to reflect this change. A screen similar to the following will be
displayed:
Flag: R = RIP Route, S = Static Route, C = Connect Route
35
Advertisement
Table of Contents
