5.13.2.2.
To configure STP parameters
STEP 1: Click the Spanning Tree tab, located at the top of the Bridging screen.
STEP 2: Click the Configure Port button.
STEP 3: Configure the parameters.
STEP 4: Click the Apply button.
5.13.2.3.
Enable/Disable STP
If you wish to Enable/Disable a STP entry, select the entry and then click the Enable
or Disable Button, which is located at the bottom-right of the Spanning Tree screen.
Note that if the entry is already enabled the Disable button will be present.
Conversely, if the entry is disabled then the Enable button will be present.
76