5.7
NAT
The NAT function can be accessed by clicking the NAT tab on the Advanced menu.
From this screen you can add or delete a Static Wan Address, static NAT mapping or
Port Range Mapping.
5.7.1 Static NAT Mapping
Any Static NAT mapping entries that are set up will be listed, click on the Add button
add a new entry or select an entry and click on the Delete button.
Add an Entry
To add an entry click on the Add button, enter the Public IP Address you wish to set
for NAT, enter the Local Address From (starting point for the range), enter the Local
Address To (end point for the range), and then click on the Apply button.
45