Table of Contents
Advertisement
Step 5
Attach the power adapter to the wall outlet or other AC source.
Step 6
After all connections have been made, turn the power-switch to the on
position. After power on, the router performs a self-test. Wait for a few
seconds until the test is finished, then the router will be ready to operate.
Caution 1:
If the router fails to power up, or it malfunctions, first verify that the
power supply is connected correctly. Then power it on again. If the
problem persists, contact our technical support engineers.
Caution 2:
Before servicing or disassembling this equipment always disconnect
all power cords and telephone lines from the wall outlet.
14
Advertisement
Table of Contents
