Table of Contents
Advertisement
5.5
DHCP Client
Note:
Before starting the DHCP Client function, the user needs to make sure that the
DHCP Server is reachable; if the ADSL Router fails to get the IP Address from DHCP
Server, the ADSL Router needs to be rebooted.
The router can also be configured as a DHCP client. In this case, the router can
broadcast a request to the DHCP Host, for an IP address, subnet mask, and domain
name, to be assigned. To set the router to DHCP client mode, select the Interface to
connect to the DHCP Host and then click the Start button.
The Stop button can be used to stop the router form operating in DHCP client mode,
and the restart button can be used to get the router to re-broadcast a request to the
DHCP Host, for an IP address, subnet mask, and domain name, to be assigned.
48
Advertisement
Table of Contents
