Table of Contents
Advertisement
4.7.2 Static route configuration
The Routes Configuration field allows you to add, modify, and delete a static route.
Type the Destination Network ID, subnet mask, and next hop IP and click a button
below to perform the requested function.
Add:
To add a static route complete the following steps:
STEP 1: Click Routing Setup from the menu bar.
STEP 2: Enter parameters for Destination Network ID, Subnet Mask, Next Hop
IP, and Next Interface (note you must select between entering a Next Hop
IP or Next interface).
STEP 3: Click the ADD button.
Modify:
To modify a static route complete the following steps:
STEP 1: Select the entry you wish to modify from the List of Static Routes.
STEP 2: Change the parameters.
STEP 3: Click the Modify button.
Delete:
STEP 1: Select the entry you wish to delete from the List of Static Routes
STEP 2: Change the parameters.
STEP 3: Click the Delete button.
36
Advertisement
Table of Contents
