Table of Contents
Advertisement
5.3.2 Add DHCP Server
To add an entry, click the Add button, and fill out the following parameters. Click
Apply to submit the settings.
Interface: eth0/wlan0. This configures the interface that will provide the
DHCP function. By factory default, the entry for interface eth0 is defined with
the gateway address 192.168.1.1, and subnet mask 255.255.255.0. The default
entry for interface wlan0 is defined with the gateway address 192.168.101.1,
and subnet mask 255.255.255.0.
Starting IP Address: The first IP address of the address pool in the DHCP
server. Note the IP address should be in the same subnet as the router's LAN IP
address.
End IP Address: The last IP address of the address pool in the DHCP server.
Note the IP address should be in the same subnet as the router's LAN IP address.
Gateway: The gateway IP address
Netmask: The subnet mask of the IP network
DNS: The IP address of the Domain Name Server
DNS2: The second IP address of the Domain Name Server
Lease Time (in Days): Upon login, the remote workstation will obtain an IP
address. This field defines the period of time that the workstation can use this IP
address to access the Internet.
44
Advertisement
Table of Contents
