GroupInfo: This configures the LAN packets that will travel through the LAN
interface to the selected WAN interfaces. If you wish to change the interfaces
that are configured you must first click on the Flush button (to remove the
current configuration), and then click on the Group Info button, select the
group interfaces and then click the Apply button. You must select eth0, as eth1
is not enabled for this product version.
AddPVC: You can add a PVC to the ATM interface. From the Bridging screen,
select an ATM interface Vpi, Vci and Encapsulation type and then click Apply.
Flush: Selecting this command from the Bridging screen, will flush all PVC
entries.
Disable: Selecting this command from the Bridging screen, will disable the
PVCs but retain the parameters, so that they can be enabled at a later point.
74