Top Cover Assy Pu / Top Cover Pu - Brother HL-2700CN Service Manual

4.5

Top Cover Assy PU / Top Cover PU

1) Remove the setscrew (BT4x10, 1 piece) of the operator panel cover PU.
2) Remove the operator panel cover PU and operator panel PU.
3) Disconnect the harness connector of operator panel PU.
4) Open the front cover PU and paper exit unit.
5) Remove the setscrew (BT4x10, 2 pieces) from the top cover assy PU.
6) Remove the top cover assy PU from the printer.
7) Release the hinge of the top cover PU to remove the top cover PU from the top
cover assy PU.
Operator panel cover PU
Operator panel PU
Harness connector
Top cover assy PU
Front cover PU
BT4x10
Fig.7-11
VII-17
Top cover PU
BT4x10
Paper exit unit