Toner Retract Solenoid Pu (Desly/Deslm/Deslc/Deslk) / Toner Retract Cam Pu - Brother HL-2700CN Service Manual

4.39

Toner Retract Solenoid PU (DESLY/DESLM/DESLC/DESLK) / Toner Retract Cam PU

1) Remove the harness connector of the developer retract solenoid PU.
2) Remove the setscrew (BT3x8, 2 pieces) of the developer retract solenoid PU.
3) Remove the toner retract solenoid PU and toner retract cam PU from inside of the
frame.
4) Remove the toner retract cam PU from the toner retract solenoid PU
(DESLY/DESLM/DESLC/DESLK).
Replacement of the developer retract solenoid requires the substantial disassembly and
also reassembly. As the inappropriate assembly procedures and the wrong use of
screws affect the product safety and the product performance, the appropriate assembly
procedures and the caution items must be respected. (This work requires the insulation
withstand voltage test and the measurement of the insulation resistance.)
Toner retract solenoid PU (DESLY)
BT3x8
Toner retract solenoid PU (DESLM)
Toner retract solenoid PU (DESLC)
Toner retract solenoid PU (DESLK)
BT3x8
BT3x8
BT3x8
Toner retract solenoid PU (DESLY/DESLM/DESLC/DESLK)
WARNING
Toner retract cam PU
Fig.7-47
VII-41