4.8
Left Side Cover PU / Duplex Connector Cover
1) Remove the duplex connector cover.
2) Remove the setscrew (BT4x10, 2 pieces) of the left side cover PU.
3) Remove the left side cover PU from the printer.
Left side cover PU
BT4x10
4.9
Interlock Switch PU (Front)
1) Disconnect the connector connecting to the interlock switch PU (front).
2) Remove the interlock switch PU (front) from the switch base (DF). The switch is
supported by the hooks and shaft.
Shaft
Hooks
Duplex connector cover
Fig.7-14
Interlock switch PU (front)
Fig.7-15
VII-19
Connector