Basic Layout Of Printer Set-Up Location - Brother HL-2700CN Service Manual

1.2.

Basic Layout of Printer Set-up Location

Fig.3-1 shows the basic layout of the printer set-up location that is suitable for smooth
operation and maintenance of the printer.
25cm (10")
Power Cord
• The space in front of the printer (70cm) is necessary to open the front cover.
• The space at back of the printer (25cm) is necessary to open / close the rear access
cover.
• The space on right side of the printer (50cm) is necessary for general access.
• The space on left side of the printer (20cm) is necessary for general access.
Table
50cm (20")
42cm (16.5")
20cm (8")
70cm
(28")
48cm
(18.9")
Fig.3-1
III-3
480 (W) x 420 (D) x 385 (H) (mm)
18.9(W) x 16.5(D) x 15.2(H) (inch)