Brother HL-2700CN Service Manual page 139

Code No.
11-1
CHECK MEDIA
11 CHK MEDIA
11-2 NO MEDIA
11 NO MEDIA
11-3
CHECK MEDIA for DUPLEX
11 CHK MEDIA [*1]
11-4 CHECK OUTER SELECTION
11 CHK OUTER [*1]
LCD Message
[*1]
[*4]
[*1]
[*4]
for DUPLEX[*4]
SELECTION [*4]
V-14
Description of Message
• Engine stands by as "CHECK
MEDIA" status.
• Alarm LED is lit.
[*1]: Applicable paper feeder is indicated
as follows;
/UPP: Upper Tray
/LOW: Lower Tray
/DPL: Duplex Unit Inside
• Confirm whether the applicable paper
tray is loaded with paper.
• Press Go Key if media shall be
changed.
• Engine stands by as "NO MEDIA"
status.
• Alarm LED is lit.
[*1]: Applicable paper feeder paper
empty condition is indicated as
follows;
/UPP: Upper Tray
/LOW: Lower Tray
/DPL: Duplex Unit Inside
• Replenish the empty tray with paper.
• Engine stands by a CHECK MEDIA
Duplex.
• Alarm LED is lit.
[*1]: Media check is indicated with the
following messages for each
feeder.
/UPP: Upper Tray
/LOW: Lower Tray
/DPL: Duplex Unit Inside
• Changes the applicable media.
• Changes the designation of media.
• Engine stands by a CHECK OUTER
SELECTION.
• Alarm LED is lit.
[*1]: Media check is indicated with the
following messages for each
feeder.
/UPP: Upper Tray
/LOW: Lower Tray
• Confirm the paper tray/paper exit tray,
and reset properly.