No.
Part Name
1
Top Cover PU
2
Operator Panel
3
Front Cover PU
4
Rear Cover Assy PU
5
Power Switch
6
AC Input Inlet
7
Interface Connector Box
8
Upper Duplex Cover PU
9
Lower Duplex Cover PU
10
Paper Stopper
Outline of Functions
To act as both of the upper enclosure and paper
tray for printed papers, and to be opened up at
the maintenance.
To display a status of printer operation and
motion.
To act as a front enclosure, and to be opened
when replacing a toner cartridge or waste toner
pack.
To exit the printed paper for transportation. (To
be opened when clearing the internal jam or
doing the maintenance.)
To power on or off the printer.
(Located at the lower left of the left side cover
PU)
To connect a power supply cable.
Space for a controller board to be installed.
Cover to be provided at the duplex
transportation inlet and to be removed when
installing the duplex unit.
Cover to be provided at duplex transportation
outlet and to be removed when installing the
duplex unit.
Stopper to be pulled for alignment of exited
papers and also prevention of falling down.
I-5