4.15
Marker Sensor
1) Disconnect the two connectors connecting to the maker sensor and toner density
sensor PU.
2) Remove the setscrew (BT4x8, 2 pieces), and remove the sensor base (TB) from the
frame.
3) Remove the maker sensor from the sensor base (TB).
4.16
Toner Density Sensor PU
1) Remove the setscrew (BT3x8, 2 pieces) of the toner density sensor PU from the
sensor base (TB).
2) Remove the toner density sensor PU from the sensor base (TB).
Connector
Maker sensor
BT4x8
Connector
Fig.7-21
Fig.7-22
VII-24
Toner density sensor PU
Sensor base (TB)
BT3x8
Toner density sensor PU
Sensor base (TB)