Registration Roller Assy Pu; Registration Actuator Pu - Brother HL-2700CN Service Manual

4.49

Registration Roller Assy PU

1) Remove the washer, coupling gear and bearing from the registration roller assy PU.
2) Remove the washer and bearing of counter-coupling gear side.
3) Remove the registration roller assy PU from the transfer unit base.
Transfer unit base
Washer
Bearing
Registration roller assy PU
NOTE: Adjustments is required when the Registration Roller is changed. Please refer to
Section5 in this
4.50

Registration Actuator PU

1) Remove the registration actuator PU that is installed to the transfer unit base.
Registration actuator PU
chapter.
Bearing
Fig.7-57
Transfer unit base
Fig.7-58
VII-48
Coupling gear
Washer