Brother HL-2700CN Service Manual page 281

P3
SERVICE CALL
P4
SERVICE CALL
P5
SERVICE CALL
Note:
Cleaning Method of "SERVICE CALL" state
Step1: For retry, press "-" key except for C3, P1, P2, F6, N* and H* error.
Step2: Turn the main power switch off.
4.2 TROUBLE SHOOT
Code
S1, S6, S7, S8, S9, S10, S11,
S12, S13, S21, E41, H37,
H38, H61
S2, S3, S4, S5, H63, H66,
H67, H68
H39, H60, H73, H74
ERROR EP3 Duplex Solenoid (U) Error
ERROR EP4 Duplex Motor Error
ERROR EP5 Duplex Solenoid (L) Error
Turn off the printer. Wait a few seconds, then turn it on
again. If still remains, replace the main PCB.
1. Is it possible to print the test page? If not, replace the
main PCB.
2. Does this problem appear when printing specific data or
printing under a specific environment? If yes, inform the
Brother office of used specific data, printer condition and
system requirement.
Turn off the printer. Wait a few seconds, and then turn it on
again.
Clearance Method
VIII-24