Structure And Usage Of The System Configuration Menu - Sony BVM-14F5U Operation Manual

Setting the Channel Selection Method and Power-Up Conditions — SYSTEM
CONFIGURATION Menu

Structure and Usage of the SYSTEM CONFIGURATION Menu

This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is
preceded by a 3-digit number. These numbers are not
displayed on the screen.
• Setting lists are indented to indicate their position in
the tree structure of the menu. (When list YYY is
found under list XXX, it is indented to the right of
list XXX.)
• The arrow mark (÷) refers you to another setting
list that appears after you make the setting, or to an
operation that is carried out as a result of the setting.
When there is no arrow mark, you can make the
setting using a single list.
Select SET UP from the menu list.
CONTROL PRESET ADJ...
COLOR TEMP ADJ...
SET UP... ÷ 300
MEMORY CARD...
COPY...
STATUS...
MAINTENANCE...
KEY PROTECT OFF
Menu list
300
SET UP menu list: Choose the menu for setting the desired items.
INPUT CONFIGURATION menu
REMOTE menu
PASSWORD menu
SYSTEM CONFIGURATION menu: Set the channel selection method and power-up conditions. ÷ 500
ON SCREEN SET menu
ALIGNMENT menu
500
SYSTEM CONFIGURATION menu: Set each of the various items.
INPUT SELECT: Select the channel number selection method (DIRECT or 10KEY).
STANDBY MODE: Select the power-up condition (OFF or ON).
DEFAULT CH: Select the power-up input channel (LAST or CH xx).
DEGAUSS DELAY: Set the time between power-up and the beginning of degaussing. Enter the
desired time (in seconds).
AFC TIME: Select the AFC time constant (0.5 or 2 ms).
RESIDUAL SC SW: Switch the residual switch (OFF or ON).
ACC SW: Switch the ACC switch (OFF or ON).
44